Auto Finesse Revitalise Restoring Compound 500ML

Our famous Revitalise range has just got better! It’s been re-engineered to a whole new level of abrasive capability, cutting deeper with a more refined and consistent finish. It removes deep swirl marks and restores tired paint that has been plagued by oxidisation, while offering a much faster and overall cleaner working experience.

Revitalise No:1 has been developed for use with a dual action or orbital machine polisher and is the first step in the Revitalise process to a fine-cut finish to paintwork.

FEATURES

• Step one in our three-step Revitalise process to a fine-cut finish.
• Fully restoring abrasive compound for hard paint types.
• Removes deep swirl marks, as well as oxidation defects.
• Use in partnership with our orange Revitalise Pad No:1 for best results.

APPLICATION

Shake the product well before use to allow ingredients to mix well. Making sure you’re well out of direct sunlight and working on a cool surface that is clean, dry and free of contaminants, prep the orange Revitalise Pad No:1 with Auto Finesse® Pad Prime and apply two pea sized drops to the pad. Set the polisher to speed setting 2 and work across an area of paintwork around 18inch x 18inch. Apply moderate pressure and work in overlapping passes. Work up to speed 4 and then back down to 2 for a final pass until the product turns clear. Once you’ve finished one panel, switch off the polisher and buff off the panel with a clean microfibre for any excess reside.

HOW TO USE

We've put together a few simple steps to help you get the best out of Revitalise No:1 (V2) highlighting what you should be doing to get the most out of Revitalise No:1 (V2) when detailing your pride and joy.

1. Shake well before use
2. Always work on a cool surface
3. Ensure surface is clean, dry and free from contaminants
4. Using the accompanying pad type, “Restoring” (pad 1) prime the pad with 2 mists of “Pad Prime”
5. Apply 2-4 small pea sized amounts of polish to the pad
6. Work across an area of paintwork approx 2’x2’ at a time, starting at speed 2, working up to speed 4 and back down to speed 2, fully work until product is clear
7. Wipe off residue immediately after each panel