Bilt Hamber Dynax-S50 750ML

Supplied with one 600mm injection lance per aerosol. When purchased in multiples, you will receive one lance for every two aerosols.

Dynax-S50 is a high-performance anti-corrosion wax that provides exceptionally long-lasting protection to steel surfaces. It creeps into welded seams and seals surface defects. Dynax-S50 forms a soft, brown, wax-like film that self-heals in the event of disruption. It is also able to arrest existing corrosion and to provide long-term protection to pre-corroded and corrosion-free surfaces.

FEATURES:

• Class-leading long-term protection for cavities, voids, chassis, doors, mud traps, machinery, boats, etc.
• Resistant to changing conditions found in cavities, others are not.
• Self-healing, protects even if the film is cut.
• Clings to vertical surfaces.
• Displaces moisture.
• Kills existing corrosion.
• Deeply penetrates flanges and folded seams.
• Easy to use – atomises superbly.
• Low odour.
• See-through coating with brown tint.
• Provides lubrication.
• Available in ready-to-use modular injection system.
• Multiple aerosols will be discounted. Single 750ml aerosols are supplied with one injection lance; multiple aerosols will be supplied with one injection lance for every two aerosols. The lances are reusable; please refer to the Injection Lance listing for more information.

HOW TO USE:

Use a brush, roller, or spray to apply Dynax-S50. Atomisation into enclosed cavities and voids is recommended to ensure thorough coverage of all surfaces. Dynax-S50 contains highly polar corrosion inhibitors that are able to displace surface moisture; very wet surfaces should be pre-treated using Bilt-Hamber Ferrosol.

Dynax-S50 aerosols require no compressor or additional equipment.

Dynax-S50 is also available in 5 litre tubs to 200 litre drums and upwards for spray application. For those without access to professional wax injection equipment, Bilt-Hamber Laboratories have developed a superb system enabling Dynax-S50 to be applied at high pressure simply, quickly, and without mess. The pressurised giant-sized Dynax-S50 aerosol dispenser accepts interchangeable heads: The 60cm cavity injection lance has a precision fluid-tip to deliver, at high pressure, a dense, finely atomised circular mist of Dynax-S50 ensuring 360-degree coverage of box sections and cavities. For accessible areas, the extension tube is removed and a solid-cone spray pattern actuator is simply clipped in its place. The pressurised aerosol dispensers contain a useful 750 ml (3/4 of a litre) of material.

Dynax-S50 Pack with 60cm cavity injection lance.

Dynax-S50 is tolerant of a broad range of application pressures and will form a coherent film upon application. Dynax-S50 will increase in viscosity at low storage temperatures.

It is recommended to place the container in a room at around 15 degrees C for 24 hours prior to use, particularly when using low-pressure equipment for spray application.

For non-aerosol dispensed Dynax-S50, warming the container (loosen cap first) by standing in a hot water bath will further reduce viscosity and is beneficial where deep crevice protection is required. Never heat aerosol dispensed product. Ensure that cavities are left unclosed for a period of 48 hours to allow the escape of carrier materials before bunging or stopping.

Dynax-S50 will provide excellent protection at a wide range of film thickness – aim to achieve a uniform dry-film thickness of around 50 microns. The tolerance of the material to maintain protection at very low film thickness makes Dynax-S50 the ideal choice where surface inspection is not easy or where uniform coatings are simply not possible.

Dynax-S50 has been proven to substantially outperform competitive materials in salt-spray trials under conditions of ASTM B117.

Dynax-S50’s soft-film is optimised for enclosed cavities where extremely corrosive conditions develop. Dynax-S50 is also recommended for protection of valuable machinery and components in transit, machine tools, moulds, etc. Dynax-S50 can be removed using a suitable solvent. Dynax-S50 is not formulated for prolonged exposure to ultra-violet (UV) light.

The advanced metal-seeking anti-corrosion molecules which form Dynax-S50 are able to displace water, so even damp surfaces can be protected. These same molecules arrest and prevent corrosion even on already rusty surfaces and provide remarkable self-healing abilities if the film is damaged. Whilst Dynax-S50 is primarily a cavity rustproofing compound, it’s also able to prevent corrosion in a multitude of mud traps and water collecting voids. Dynax-S50 has been used with superb results to protect voids and cavities in steel boats, vessels, offshore installations, and other steel structures subject to severely corrosive atmospheres.